power locks in a 99 honda civic

Home / the12volt's Install Bay / Car Security and Convenience / power locks in a 99 honda civic (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

SAyeed khan

Member - Posts: 17

Joined: November 04, 2004

Location: Trinidad and Tobago

Posted: November 05, 2004 at 3:30 AM / IP Logged

How connect power lock wires of a viper 700 to a 99 honda civic .Please help me I am only a beginner.

Ben.c

Member - Posts: 29

Joined: October 30, 2004

Location: Australia

Posted: November 05, 2004 at 3:51 AM / IP Logged

The two wire lock connector from your viper alarm are light blue and light green , connect these wires to green / white ( lock ) and green / orange ( unlock) . These wires are found above fuse panel or at keyless entry module or you can also find them behind the radio in a green connector . When you locate these wires check them with a test light before you connect them . They are negative trigger so if you connect the ground clip of your test light to the body of vehicle and probe these wires one should lock and the other unlock.

Good luck

ozy installer

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

power locks in a 99 honda civic

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.