port/volume calculation

Home / the12volt's Install Bay / General Discussion / port/volume calculation (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

D-man

Member - Posts: 2

Joined: April 22, 2002

Location: United States

Posted: April 23, 2002 at 2:20 AM / IP Logged

WHEN FIGURING BOX VOLUME, WOULD I INCLUDE THE PORT IF IT IS OUTSIDE BOX?

more bass!!

pat28ca

Member - Posts: 45

Joined: April 21, 2002

Location: Canada

Posted: April 23, 2002 at 9:24 AM / IP Logged

add the box volume to the port volume . that will give you the total volume that your box should be. remember all your measurements have to be in the same type, ie inches , ft ,etc.the port volume is extra on top of the box volume.

pat28ca

Member - Posts: 45

Joined: April 21, 2002

Location: Canada

Posted: April 23, 2002 at 9:28 AM / IP Logged

one last thing, the measurements that you get from any box programs or specs are inside volume. take into account that the thickness of the box will give you a different measurement.

barkdog666

Member - Posts: 10

Joined: April 26, 2002

Location: United States

Posted: April 26, 2002 at 4:37 PM / IP Logged

Go to Radio Shack and look for a book called Advance Speaker Systems. It will tell you everything you want to know about building boxes, speaker reaction and passive crossovers. Later

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

port/volume calculation

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.