Indiglo Gauges for 94 Accord EX

Please don't laugh everyone.I purchased a set of indiglo gauges from Ebay for a REALLY good deal. They took 3 months to get to my house. At any rate, it took me about 2 hour to put them in. I had no idea this install was going to be so difficult. Got down to the last screw and the GAS & TEMP needles STICK! I was so upset I called the company personally and they have gave me the run around everytime I call. I won the auction in Marchl, did not get the guages til near end of MAY! I don't think they are made for my car. I have yet to take them out because I don't feel like it! The instructions were just a picture of a hand putting gauges in and sliding them over some needles. What have I done wrong? Ill sell them for same I bought them. I mean they look good it is just I have to keep going to the gas station guessing how much gas I have and no telling if im running hot or not.

HELP!

-Ambush

Hey Ambush;

All the Indiglo gauges that we have ever installed lie flat on the bezel of the dash gauge. I don't know why the needles are "sticking" because they should be clear of the Indiglo gauges. When you mean they are sticking... do you mean that no longer work or is it that they move a little bit and then stop ? If they do not move at all, maybe one of the screws from the back of the gauge loosed off. If this happens then the gauage doesn't work anymore because it's attached to the board by those 3 ( or 4 ) screws.