Remote Start Troubleshooting

Home / the12volt's Install Bay / Car Security and Convenience / Remote Start Troubleshooting (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

kelpike

Member - Posts: 10

Joined: March 18, 2004

Location: United States

Posted: November 19, 2004 at 6:00 PM / IP Logged

I have a Python 1500 ESP with remote start in my 94 Chevy Blazer. The remote start will not start the truck.

When I press the lock & unlock buttons at the same time, I hear a quick buzz noise (same noise as when the lights are left on or the keys are left in the ignition) and the lights flash on the truck, then a few seconds later, the lights flash again, but the truck does not start. Any suggestions would be greatly appreciated. Thanks in advance.

Sexified

Copper - Posts: 87

Joined: October 17, 2004

Location: Canada

Posted: November 19, 2004 at 6:19 PM / IP Logged

fuses, one of the 30 amp fuses that is at the relays is done, replace it and try again.

sweet.

dfiddy

Copper - Posts: 162

Joined: August 17, 2002

Location: Canada

Posted: November 19, 2004 at 10:39 PM / IP Logged

sweet

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Remote Start Troubleshooting

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.