remote starter to open trunk

Home / the12volt's Install Bay / Car Security and Convenience / remote starter to open trunk (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

r2nv

Member - Posts: 12

Joined: November 30, 2004

Location: Canada

Posted: November 30, 2004 at 7:02 AM / IP Logged

I want my remote starter to open my trunk. It has a 12 volt neg output. and the trunk button has jaust a power and a ground in the glove box, how do i hook up a relay for that.

jaurora

Silver - Posts: 429

This member has made a donation to the12volt.com. Click here for more info.

Joined: January 16, 2004

Location: United States

Posted: November 30, 2004 at 7:23 AM / IP Logged

YOU NEED A 12V RELAY,

CONNECT PIN 85 TO A FUSED CONSTANT 12V SOURCE

CONNECT PIN 86 TO THE OUTPUT OF THE REMOTE STARTER

CONNECT PIN 87 TO YOUR TRUNK WIRE

CONNECT PIN 30 TO +12 VOLTS IF IT IS POSITIVE SWITCHED OR CONNECT IT TO GROUND IF GROUND SWITCHED.

MECP certified (If it really means anything)

Jeremy

raydawg357

Silver - Posts: 769

Joined: June 17, 2003

Location: United States

Posted: November 30, 2004 at 8:26 AM / IP Logged

before you connect the relay, check to see what polarity your aux wire from the alarm throws. If it throws a (-), you won't need the relay. Just connect it direct.

Do it right the first time

jaurora

Silver - Posts: 429

Joined: January 16, 2004

Location: United States

Posted: November 30, 2004 at 8:56 AM / IP Logged

Raydawg is right but one think that will help to justify this issue is what kind of car is this?

MECP certified (If it really means anything)

Jeremy

r2nv

Member - Posts: 12

Joined: November 30, 2004

Location: Canada

Posted: November 30, 2004 at 10:21 AM / IP Logged

Thanks for your help guys. jaurora was right, the other problem was that part of the remote starter was fired in the module so it was not sending groung via the trigger wire, went to exchange now it work, Thank from r2nv

elantra

Member - Posts: 3

Joined: December 18, 2004

Location: United States

Posted: January 07, 2005 at 11:20 PM / IP Logged

hey guys i was looking for some help with setting up my new trunk poper to my alarm. i have an 03 elantra and the remote start i have just installed has a trunk pop output. i was wondering if i needed a relay to hook up the alarm output since it only carries a -500 mA output. if i do need a relay are the instructions above correct?

thank you.

elantra

KarTuneMan

Platinum - Posts: 7,056

This member consistently provides reliable information

Joined: December 14, 2004

Location: Isle Of Man

Posted: January 08, 2005 at 7:28 PM / IP Logged

You have an 03 Elantra with an electronic trunk release?????

WoW.....never seen one!!

elantra

Member - Posts: 3

Joined: December 18, 2004

Location: United States

Posted: January 09, 2005 at 10:03 PM / IP Logged

no i am adding an electronic trunk release to the remote start/alarm/keyless combo i just installed and i was wondering if i needed a relay or not and if so was the diagram above correct. is 500 mA enough power to switch the opener??

elantra

Member - Posts: 3

Joined: December 18, 2004

Location: United States

Posted: January 09, 2005 at 10:07 PM / IP Logged

elantra wrote:

elantra

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

remote starter to open trunk

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.