the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2001 Kia Spectra Cruise Control Install


Post ReplyPost New Topic
< Prev Topic Next Topic >
tbonetommy 
Member - Posts: 4
Member spacespace
Joined: October 13, 2002
Location: United States
Posted: October 13, 2002 at 5:45 AM / IP Logged  
i have a universal cc to install on my Kia.  have never installed a cruise control, however, willing to give it a go!  question i have is - am I getting over my head?  don't have any specific questions as yet (still waiting for cruise control to arrive via mail).  can anyone offer any suggestions or general tips before i begin?
tbonetommy
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: October 13, 2002 at 8:49 AM / IP Logged  
  • Solder all connections
  • use a DMM
  • have patience
  • use shrink wrap tubing on all external connections

Here is the VSS Information for the 2001 Kia:

VSS Wire: LOCATION 5- POSITION 42 OF ECM

VSS Wire Color: ORANGE / BLACK
VSS Pulse: 4000
VSS Tach Wire: LOCATION 5- POSITION 47 OF ECM
Tach Signal Wire Color: GREEN
Brake Switch Positive: YELLOW
Brake Switch Negative: ORANGE

Here is the rest of the information on the ignition wires needed:

  • | 12V|red or black        |+  |ignition harness            |
    | STARTER|BLACK / YELLOW        |+  |ignition harness            |
    | IGNITION|WHITE/ blue          |+  |ignition harness            |
    | SECOND IGNITION|white               |+  |ignition harness            |
    | ACCESSORY|green               |+  |ignition harness            |
    | POWER LOCK|add actuator        |   |in driver door              |
    | POWER UNLOCK|same                |   |                            |
    | PARKING LIGHTS +|pink/black          |   |DKP in white 18 pin plug    |
    | PARKING LIGHTS -|green               |   |headlight switch            |
  • | TACHOMETER|yellow/white        |   |plug on strut tower         |
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
tbonetommy 
Member - Posts: 4
Member spacespace
Joined: October 13, 2002
Location: United States
Posted: October 13, 2002 at 3:35 PM / IP Logged  

Jeff,

thanks for advice.  What is DMM?  And what external connections are there?  Also, do i have to get into all of those ignition harness connections?

tbonetommy
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: October 13, 2002 at 10:34 PM / IP Logged  

A DMM is a digital multimeter used for measuring the voltages of target wires. You will need to access some of the ignition wires for the CC unit but not all of them. I have listed all the ignition wires but use only the ones that the installation manual asks for.

Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
tbonetommy 
Member - Posts: 4
Member spacespace
Joined: October 13, 2002
Location: United States
Posted: October 15, 2002 at 8:17 PM / IP Logged  

Jeff,

thanks, this helps.  have'nt started yet - waiting for cc.  when i start, probably, maybe, get back with ya.  thanks again.

tbonetommy

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Tuesday, November 5, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer