1988 jeep side markers

Home / the12volt's Install Bay / Lights, Neon, LEDs, HIDs / 1988 jeep side markers (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

blackyj88

Member - Posts: 2

Joined: December 07, 2004

Location: United States

Posted: December 07, 2004 at 1:01 PM / IP Logged

how can i get my side markers on my jeep to blink with the front turn signals. is there a certain way that i would have to wire this.

it's a jeep thing

Hymer

Silver - Posts: 695

Joined: November 20, 2004

Location: United States

Posted: December 08, 2004 at 10:23 PM / IP Logged

Cut the 12v wire in the markers and tap into the 12v wire in each respective sides blinker, then run that wire to the cut side if the marker light.. real simple..

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

1988 jeep side markers

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.