the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2005 yukon R/S


Post ReplyPost New Topic
< Prev Topic Next Topic >
splicerman 
Member - Posts: 3
Member spacespace
Joined: December 02, 2004
Location: United States
Posted: December 09, 2004 at 12:29 AM / IP Logged  
I have a clifford solaris 5 installed in my 05 Yukon. When I R/S it (with system armed) the driver info says "service stability control", the abs light goes on, and the traction control light stays on. Then the engine shuts down after a few seconds and starts up again automatically with no problem. Any thoughts or concerns? Thanx.
hagmanti 
Silver - Posts: 304
Silver spacespace
Joined: September 14, 2004
Location: United States
Posted: December 09, 2004 at 9:50 AM / IP Logged  
You are most probably not powering an ignition wire that should be powered.
My $.02,
Me
gfella2000 
Member - Posts: 28
Member spacespace
Joined: December 07, 2004
Location: United States
Posted: December 09, 2004 at 2:10 PM / IP Logged  
Make sure you have ignition #1 (Pink) and ignition #2 (thin White) connected correctly.
gfella 20000000000
splicerman 
Member - Posts: 3
Member spacespace
Joined: December 02, 2004
Location: United States
Posted: December 09, 2004 at 9:04 PM / IP Logged  
Fixed it. It turned out I needed it to learn the RPM for it to remote start without it shutting down and restarting.......................Go figure..................

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, May 3, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer