Chevrolet Venture Warner Bros

Home / the12volt's Install Bay / General Discussion / Chevrolet Venture Warner Bros (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

jeff___H

Member - Posts: 2

Joined: December 12, 2004

Location: United States

Posted: December 12, 2004 at 10:58 AM / IP Logged

Hopefully someone here has worked with one of these! I can't find the trick for removing the factory VideoCassette Player. It has to come out in order to get at the two screws that hold the center bezel in. I need to pull the factory head unit in order to install an add-on cd/mp3 changer.

Anyone? Reply here or shoot me an e-mail.

Back to Top

rolln_on_em

Member - Posts: 21

This member has made a donation to the12volt.com. Click here for more info.

Joined: August 07, 2004

Location: United States

Posted: December 12, 2004 at 11:15 AM / IP Logged

we removed one at a shop I used to work at, I took like 6 hours to figure out, there is like a cable you have remove, and a whole bunch of brackets, sorry I dont have specific instructions, all I can tell you is that it is a major BIOTCH.

Looked like the car puked the lower dash out.

Have Fun

Bryan

Yeah I drive a slow car; but damn it looks good

Back to Top

jeff___H

Member - Posts: 2

Joined: December 12, 2004

Location: United States

Posted: December 13, 2004 at 7:42 PM / IP Logged

Anyone else?

Back to Top

sparkie

Platinum - Posts: 2,061

Joined: November 06, 2003

Location: Canada

Posted: December 15, 2004 at 4:20 PM / IP Logged

Remove the two plastic push plugs that go up into the VCP from the pocket below. Pry them down and out. Remove the trim above the VCP by pulling straight back to release the clips. Depending on the year of the van, you can either pull the VCP out the front after pushing it forward to release the clips in the back, or you must unscrew it. If there are two 7mm screws going straight down on the back of the VCP, take them out. Pull the VCP forward to get at the two hidden 7mm screws that hold the back of the rear lower console to the dash support. Remove the two long screws on the back edge of the lower pocket. The whole console comes out VCP and all. The VCP can be removed out the back after it's all out in this version.

sparky

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Chevrolet Venture Warner Bros

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.