the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2000 Sierra tach wire location.


Post ReplyPost New Topic
< Prev Topic Next Topic >
adic58 
Member - Posts: 2
Member spacespace
Joined: December 12, 2004
Location: United States
Posted: December 12, 2004 at 11:55 AM / IP Logged  

Any help  on where to locate and tap into the tach. Most info just says to tap at coil, this truck has one at each cylinder.

And is the #1 cylinder the best one to tap into if there is no other option?

 

samflo
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: December 12, 2004 at 12:28 PM / IP Logged  
Yes, use the injector wire and doesn't really matter which injector you use. There are 2 wires on each injector, use the uncommon colored one
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Wayneman 
Member - Posts: 2
Member spacespace
Joined: May 23, 2004
Location: United States
Posted: December 12, 2004 at 12:45 PM / IP Logged  

samflo,

Is the Sierra the same as an S-10?

If it is then this might help. White @ Ignition Control Module Is Located On The Passenger Side Of The Engine Compartment. Wire Can Also Be Found As WHITE At Inst Cluster Or PCM On Passenger Side Of Engine Compartment.

If you have the GM Passlock II, don't forget to bypass it or your remote start will not work correctly.

If you are talking about the Oldsmobile Cutlass Cierra the newest listing that I have is for a 94 or 96. I am happy to help. Just let me know.

Good luck.

gizmo

adic58 
Member - Posts: 2
Member spacespace
Joined: December 12, 2004
Location: United States
Posted: December 12, 2004 at 4:11 PM / IP Logged  
Velocity Motors wrote:
Yes, use the injector wire and doesn't really matter which injector you use. There are 2 wires on each injector, use the uncommon colored one
Jeff, there are four wires on each injector. Is the anothe place to tap into other than the inj? Thanks
samflo

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, April 25, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer