hooking up 2 amps

Home / the12volt's Install Bay / Car Audio / hooking up 2 amps (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

locomotors

Member - Posts: 11

Joined: November 13, 2004

Location: United States

Posted: December 14, 2004 at 7:45 AM / IP Logged

If i run a positive wire from the battery how should i split the line for both amps?

rafael

Back to Top

daverulz

Member - Posts: 6

Joined: December 10, 2004

Location: United States

Posted: December 14, 2004 at 2:58 PM / IP Logged

To split the line, you will need a distribution block. They can be had in the fused or non-fused variety.

check it out: http://www.partsexpress.com/webpage.cfm?webpage_id=3&SO=2&DID=7&CAtid=35&ObjectGroup_ID=17&filter=block

Back to Top

poeticdrums

Copper - Posts: 49

Joined: October 01, 2004

Posted: December 17, 2004 at 3:06 PM / IP Logged

If you go to wal-mart you can buy an amplifier kit that is made for two amps and It comes with a distrobution block that breaks one 4 AWG wire into two 8 AWG wires. It also comes with two sets of RCA wires and something like an 80-100 amp fuse. Mine came with 100 but some of the newer ones came with 80. The kits are pretty cheapr...something like 30 bucks...so for a good all around package for two amps check that out! The brand name is Scosche

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

hooking up 2 amps

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.