the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

please help me chose a budget amp, box


Post ReplyPost New Topic
< Prev Topic Next Topic >
quick4321 
Copper - Posts: 115
Copper spacespace
Joined: July 29, 2004
Location: United States
Posted: December 15, 2004 at 4:07 AM / IP Logged  
I have a P.O.S. commuter car Im putting a stereo in so I have tunes on my hour and fifteen min each way commute. I am going Alpine CDA-9830, sirius add-on, Nice MB Quart fronts, average rear speakers (if I put in any at all). I have  a few subs lying around all 12". I have 2 old school orions and 2 mtx 8000's I also have 2 sub enclosures. 1 bandpass for 2 12" and 1 sealed box for 2 12" subs. SO im looking for an amp to run the fronts and an amp to run the subs. I dont want to go highend but I dont want crap. Whats the best bang for my buck? I see a bunch of new hifonics and soundstreams dirt cheap on Fleabay. The car is a 98 geo prizm. SO which subs, which enclosure and what amps do I run? Also I have a IDQ 10" lying around I could throw into a small box. I was thinking about doing the 10" in a sealed box and run a 5 channel amp to run the entire system? Please give me your opinions. THanks
rt2party 
Member - Posts: 41
Member spacespace
Joined: December 14, 2004
Location: United States
Posted: December 15, 2004 at 7:36 AM / IP Logged  

my recomendation is to run the MTX's in a sealed box with Boss amps all around. the trick to buying boss amps is, if it says it runs 1400 watts, act like it has a # 1/2 that big. i nkow some people here have had bad experiences with boss amps but i had one powering my mtx 6000's and it still runs like a champ (i sold it but i know it is still runnin' strong). good luck. ~Ryan

PS: hey, boss is better than sony!

bigboi11 
Copper - Posts: 83
Copper spacespace
Joined: December 07, 2004
Posted: December 15, 2004 at 9:48 AM / IP Logged  
what kind of budget are you talking about.  Give me a price range.
Ocuriel 
Copper - Posts: 141
Copper spacespace
Joined: December 01, 2004
Location: United States
Posted: December 15, 2004 at 10:02 AM / IP Logged  
Soundstream van gogh 800.5. This 5 channel amp will power all your system. You can get it for like $300 if you look in the web.
kfr01 
Gold - Posts: 2,121
Gold spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: April 30, 2003
Posted: December 15, 2004 at 4:20 PM / IP Logged  
I'd buy a separate mid/high amp and sub amp - for no other reason than flexibility down the road, should you decide to get a new sub.
Try the IDQ 10" you have laying around in a small box, I've been pleased with mine. It doesn't have the lowest lows and isn't the loudest either, but if you listen at moderate levels like I do, you could be very satisfied with the quality sound while not needing much power or space.
New Project: 2003 Pathfinder
wheelerdr 
Copper - Posts: 337
Copper spacespace
Joined: October 25, 2004
Location: Louisiana, United States
Posted: December 16, 2004 at 3:35 AM / IP Logged  
I would buy seperat amps, since you are on a tight budget go to etronics.com and check out what they have. I would go to locustaudio.com and get the kenwood excelon 811d 235 for a 1000 w amp and it howrks great, and it is cea compliant. you can go to walmart and get a sony 4 ch amp for 100.00 I have this amp it is 500w rms is about 50 per ch. and sound great. you can get some kenwood 5 1/4 or 6 1/2 for around45.00 at etronics.com
quick4321 
Copper - Posts: 115
Copper spacespace
Joined: July 29, 2004
Location: United States
Posted: December 16, 2004 at 9:46 PM / IP Logged  

I was looking at the 5 channel amps, but the sub output is so minimal. Im going to go with a 75x2 or 75x4 amp, and Id like to pick up a lower end 1000w amp to push my mtx 8000's. the cheapest amps I see on ebay right now are the soundstream vango and some of the hifonics stuff. Do you guys see any problems going with either of those brands (preferences???)? I think I can get those amps for under 200.00 each. HU, I think Im going to go 9830 from alpine so I can get the sirus add-on module for it. Id run my CVA-1005 in my beater but it wont control the sirus add--on unit so Im stuck buying a alpine.

Budget .... $250 = 9830 from alpine 400 max for 2 amps. Thats spending more than I want but  I think that sould get me a decent setup.

Clarion DRX9255
Dynaudio MD130, MD140/2, MD160, MD170
(4) ID V3. 12" Dual 2ohm IB setup
EPX2 Symmetry w/ zapco line drivers
Monior 1 amps (2)MK2.120, MK4.70
Hifonics Colosus VII 1600x1
Ravendarat 
Platinum - Posts: 2,806
Platinum spacespace
Joined: February 23, 2004
Location: Canada
Posted: December 16, 2004 at 10:01 PM / IP Logged  
Check into JBL, they have some great amps at really good price ranges. Soundstream isnt bad and alot of people on here really like Hifonics stuff. I have to respond to the comment about Boss. I hate sony but would by one any day of the week over a Boss amp. I personally have no use for something thats that usless and blows up that often. I thnk sony crashes way more than they should but personal experience is that boss amps break more than they work. Thats just unacceptable to me.
double-secret reverse-osmosis speaker-cone-induced high-level interference distortion, Its a killer
jeffchilcott 
Platinum - Posts: 2,483
Platinum spacespace
Joined: April 11, 2002
Location: United States
Posted: December 16, 2004 at 11:06 PM / IP Logged  
among everything I have to ask..what are you going to do about that little 65amp alternator under the hood?   might want to really consider a single sub and small amp...just my thoughts
2009 0-1000 Trunk WR 154.0DB 2009 1001+ Trunk WR
2007 USACI World Champion
2007 World Record
2006 USACI Finals 2nd Place
sbcaprice305 
Copper - Posts: 57
Copper spacespace
Joined: November 27, 2004
Location: United States
Posted: December 17, 2004 at 1:03 AM / IP Logged  

go to    www.ikesound.com  and check out the profile amps...some of the best cheap amps out there...better then sony and boss at least...

what ohm are the 8000's?

i have 3 w/ a mtx 1501 amp and sounds ok..im gettin rid of my very sh*tty prefab box and setting the amps right when i redo it in the spring...i can tell they have potential

Page of 2

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Wednesday, April 24, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer