Viper 791 Door Locks

Home / the12volt's Install Bay / Car Security and Convenience / Viper 791 Door Locks (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

Scott35

Silver - Posts: 258

This member has made a donation to the12volt.com. Click here for more info.

Joined: August 02, 2002

Location: United States

Posted: December 17, 2004 at 6:56 PM / IP Logged

Lock is gray, unlock is purple. In front of fuse box.

Tacomacrew

brentswanton

Member - Posts: 13

Joined: July 05, 2003

Posted: December 17, 2004 at 7:04 PM / IP Logged

yes These are the wires Im using. Ive tested them by using the key in the outside driver door lock. Also I can ground a seprate wire and touch each wire to the purple ogrey wire and it will operate all door locks.

brentswanton

Member - Posts: 13

Joined: July 05, 2003

Posted: December 17, 2004 at 7:06 PM / IP Logged

I just dont seem to be getting negative pulses from the alarm blue and green wires. How does the alarm know whether to send pos or neg pulses to these wires.

daze

Copper - Posts: 112

Joined: December 02, 2004

Posted: December 17, 2004 at 9:26 PM / IP Logged

you need to key the passanger door.

say when you hit the lock button: when one wire gets positive, the other gets negative and when you hit un-lock it reverses.

if you have ground on one wire all the time, you may have a different style locks or simply the wrong wires

daniel2002p

Silver - Posts: 524

Joined: October 10, 2003

Location: United States

Posted: December 18, 2004 at 12:21 AM / IP Logged

brentswanton wrote:

sorry whats the 451 M? Im just using what came with system.

it is the small one by one inch box that came with the alarm that plugs into the doorlock hole on the brain with all the wires I have stated earlier are found. if you need more helop, you can just pm me or write me an email, I have the exact same car and know what it need, since I have the similar alarm on it.

2005 Toyota Corolla S

1.8L VVT-i I-4

Always double check your wires with a DMM!!!

Do Not Use A Test Light!!!

MECP Certified Installer!

Best Buy 665 - IN IT TO WIN IT! TEAM MOBLE!

brentswanton

Member - Posts: 13

Joined: July 05, 2003

Posted: December 18, 2004 at 7:20 AM / IP Logged

Well I found out what the problem was. I had the door lock harness plugged into the writer port. Amazing how good it works when plugged into the right spot. Never intall when tired! Thanks for everyones help. Brent

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Viper 791 Door Locks

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.