Grand Cherokee 02 Viper 791XV

Home / the12volt's Install Bay / Car Security and Convenience / Grand Cherokee 02 Viper 791XV (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

whensmett

Member - Posts: 15

Joined: September 05, 2004

Location: United States

Posted: December 18, 2004 at 9:05 PM / IP Logged

Jeep Grand Cherokee Laredo 4.7 V8 - 2002

I have to install a Viper 791XV into my wife's Jeep this weekend.

Do you guys have any advices before I start installing. This is my first Jeep. Never done Jeep before.

The system will be :

Viper 791XV with JDL-PK for Bypass-Door Lock-Window Roll Up

Thanks

whensmett

ksutton

Copper - Posts: 94

Joined: December 06, 2004

Location: United States

Posted: December 19, 2004 at 5:25 PM / IP Logged

eazy car

whensmett

Member - Posts: 15

Joined: September 05, 2004

Location: United States

Posted: December 19, 2004 at 5:49 PM / IP Logged

Installation had to be delayed. Too cold. Still looking for your help guys. What should I be careful of? This installation must have been done by many out there. Anybody who can share the steps? Thanks

whensmett

xtremeaudio

Copper - Posts: 174

Joined: August 30, 2004

Location: United States

Posted: December 20, 2004 at 3:49 AM / IP Logged

never get in to yellow split loom that air bag

Chiana

Member - Posts: 35

Joined: November 13, 2004

Location: United States

Posted: December 20, 2004 at 9:34 AM / IP Logged

It is pretty easy. What type of bypass do you have? The one that holds a programmed key or the one that has a chip you have to program to the Jeep?

whensmett

Member - Posts: 15

Joined: September 05, 2004

Location: United States

Posted: December 20, 2004 at 11:10 AM / IP Logged

I have the JDL-PK which doesn't require a key but I am a little puzzled on how this is connected to the Viper 791XV. Need help from someone who has done it before. Thanks again guys. I'm getting there.

whensmett

Chiana

Member - Posts: 35

Joined: November 13, 2004

Location: United States

Posted: December 20, 2004 at 11:28 AM / IP Logged

https://www.the12volt.com/installbay/forum_posts.asp?tid=45574&PN=1

See there. I am installing a 791XV on a Jeep Cherokee (XJ) and had the same question. One end goes to a constant 12+, the otehr to the blue wire on the alarm.

If you didn't know this you need tow workign keys to program the bypass into the WJ's pass key system.

-Chris

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Grand Cherokee 02 Viper 791XV

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.