Commando rs-560 help

Home / the12volt's Install Bay / Car Security and Convenience / Commando rs-560 help (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

lexis99

Member - Posts: 5

Joined: December 20, 2004

Posted: December 20, 2004 at 7:11 PM / IP Logged

Ok here is the problem I need help with. I hve a 03 Ford focus and am trying to get the keyless entry to work. The problem I am having is that the unlock feature works but not the lock feature. I have programmed everything and double checked all my wires. Also when I start the car the loacks dont lock but when I turn it off they do unlock. Any help would be appreciated.

And on a sedon note I had to buy a bypass for the remote start feature. I got a DEI555s to do this and got it to work. But when I tried to use the key the key wouldnt work. But if I take the 555s away from the ignition it works.

Thanks

KarTuneMan

Platinum - Posts: 7,056

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: December 14, 2004

Location: Isle Of Man

Posted: December 21, 2004 at 3:02 PM / IP Logged

Ya know.....I have heard of this happening on other ford vehicles as well, with DEI equipment! Im assuming that its DUMB luck that I only seen it with DEI stuff

I also have been a victom of this, but it happened a little different to me. I pulled a excursion in to the shop to instal an amp and subs. the truck spent the night, the next morning it wouldnt start with the key. only remotley

Im gonna monitor this post to see what kind of answers you get. I did do some reading on my astrochart that talks about the BCM shutting down after 3min. But that effected the UNLOC not the LOCK WEIRD huh Commando rs-560 help - Last Post -- posted image.

Sorry I coulnt help ya

lexis99

Member - Posts: 5

Joined: December 20, 2004

Posted: December 22, 2004 at 8:37 PM / IP Logged

Hopefully someone will be able to help.

lexis99

Member - Posts: 5

Joined: December 20, 2004

Posted: December 22, 2004 at 8:38 PM / IP Logged

Hopefully someone will be able to help.

Chiana

Member - Posts: 35

Joined: November 13, 2004

Location: United States

Posted: December 23, 2004 at 1:00 AM / IP Logged

Make sure that the bypass module isn't on all the time when starting. I found in my Jeep XJ that two signals will confuse it and it won't start (tried to remote start with keys in ignition).

-Chris

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Commando rs-560 help

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.