bulb check problems

Home / the12volt's Install Bay / Car Security and Convenience / bulb check problems (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

rsudbay

Copper - Posts: 68

Joined: December 02, 2004

Location: United States

Posted: December 21, 2004 at 4:03 PM / IP Logged

i can not find the bulb check wire and i have to finish this car today. the car is a 97 cheve cavalier. please help

hey, everyone has got to start somewhere. but ill learn

Back to Top

swamprat323

Gold - Posts: 1,335

Joined: September 22, 2002

Location: Florida, United States

Posted: December 21, 2004 at 5:39 PM / IP Logged

Waht do you mean by bulb check.

Back to Top

slicksam

Copper - Posts: 291

Joined: July 12, 2004

Location: Canada

Posted: December 21, 2004 at 7:20 PM / IP Logged

i think he mean the bulb TEST wire.

it is on the ignition harness...I think there are 2 black thin wires.....it is the one that gives ground on CRANK postion.

Good luck

Testing is the key

Back to Top

rsudbay

Copper - Posts: 68

Joined: December 02, 2004

Location: United States

Posted: December 21, 2004 at 7:31 PM / IP Logged

they both have ground all the time. that is why i am confused. but could it be because i have the harnest unpluged

hey, everyone has got to start somewhere. but ill learn

Back to Top

slicksam

Copper - Posts: 291

Joined: July 12, 2004

Location: Canada

Posted: December 21, 2004 at 8:00 PM / IP Logged

if your talking about the ignition harness....test the wire when it is plugged...and one will give you a ground on crank

Testing is the key

Back to Top

slicksam

Copper - Posts: 291

Joined: July 12, 2004

Location: Canada

Posted: December 21, 2004 at 8:00 PM / IP Logged

if your talking about the ignition harness, yes plug it in. test the wire when it is plugged...and one will give you a ground on crank

Testing is the key

Back to Top

NowYaKnow

Gold - Posts: 1,217

Joined: December 18, 2002

Posted: December 21, 2004 at 8:08 PM / IP Logged

The ignition harness is a white plug and I think has black wires in pins E & F. These are not your bulb test wires. Is there a BLACK plug above the white plug? If so, the black plug has your bulb test wire in it. And as others have mentioned, the wire will read a ground while cranking.

Mike

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

bulb check problems

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.