91 Taurus Head Unit

All that harness is is an expensive speaker level convertor. Just buy one of these

•   http://www.scosche.com/scosche.aspx?ItemID=SLC4&CategoryID=36 
• http://www.autosoundgear.com/tek9.asp?pg=products&specific=jqergoe8.

 Both will take the RCA output from your cd player and turn it into a connection u can splice into your current radio harness. Unlike that harness you showed above you can use the level controls on both of these units to match the volume of your CD player to the volume of the factory amps. For the Peripheral LOC you will need to split the output so it can go to both inputs of the factory amp (front and rear).

Hmm,  maybe this car has only 6 speakers in it.

Anyways,  the guy at the stereo shop told me to fish around in there and find another plug to plug my harness into.  I found it,  and unpluged it and there was no sound from the stereo.

I hooked up the harness into that harness into my head unit.  4 speakers come on fine and sound great.  However,  the front 2 dash speakers don't come on.

Any ideas??  lol

Thanks,

Jeremy

Sorry,  no pics of the front right now.  But,  this is the back,  and the side of it if that helps.

Like I said.  I dug in to the left and uncliped the one harness from what it was to.  The speakers stoped working.  I plugged my wire harness to that,  and they work now,  all but the front 2 in the dash. 

I think those wires are in the other plug that was originally into the radio w/ the 5 wires.  Not sure though...

[img]http://www.pennswoods.net/~jllowe/Pics/Ford%20Stereo/DSC00236.JPG[/img]

[img]http://www.pennswoods.net/~jllowe/Pics/Ford%20Stereo/DSC00237.JPG[/img]

ERR,  here are those pics.