94 sunbird engine monitoring

Home / the12volt's Install Bay / General Discussion / 94 sunbird engine monitoring (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

bigg4x4

Member - Posts: 7

Joined: June 30, 2003

Location: United States

Posted: December 30, 2004 at 6:26 AM / IP Logged

I am installing remote start on my 94 pontaic sunbird and I need to determine which form of engine monitoring to use. Either voltage or tachometer. Can anyone help with this matter? I think I should use the wire located at the ECM behind the glove box. Is this correct??? Thank you for you help.

sparkie

Platinum - Posts: 2,061

Joined: November 06, 2003

Location: Canada

Posted: December 30, 2004 at 3:17 PM / IP Logged

You should only ever use a tach signal to monitor an engine. The voltage way is a very poor way and prone to fail. The tach wire on your car is the white wire at the coil on the engine.

sparky

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

94 sunbird engine monitoring

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.