avistart 3200 remote start

Im installing my first remote start system into my 2004 honda civic lx. I have everything installed and working properly except for the remote start portion. On the relay satellites do I just connect those to the neccassary wires on the ignition switch harness without cutting anything, and aslo do I have to install the starter kill relay, even with the factory antitheft system, if so Ho do I install the kill relay?? if more info is needed please ask. Thanks for any help

Yes,  hook the Relay Outputs to the Correct wires at Ignition Harness

I beleive that takes a IMMOBILIZER BYPass alsoYou DO NOT have to use the Starter Kill if you choose not.  If you do:* Installing A Starter Kill Relay At The Ignition Switch Harness Before The Starter Wire Enters The Driver Side Fuse Block May Cause A "Check Engine" Light To Come On. Starter Wire Should Be Accessed After Fuse Block.

MO

Don't Learn from Others Mistakes

You Might Be the One That Knows.

thanks , I will try more on the install tommorrow, i will keep you all posted