2000 impala BOA

Home / the12volt's Install Bay / Car Security and Convenience / 2000 impala BOA (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

lscarfacel

Member - Posts: 4

Joined: December 30, 2004

Location: United States

Posted: January 03, 2005 at 4:11 PM / IP Logged

can someone show me a diagram or explain to me what i have to do to get the wiring correct on a 2000 Impala... I am putting a Boa Auto start system w/ keyless in it. i understand that there is a certain way you have to wire the door locks and ignition.... please HELP

Craig3708

Copper - Posts: 155

Joined: January 30, 2004

Location: Canada

Posted: January 03, 2005 at 4:17 PM / IP Logged

Chevrolet

Impala

2000-2002

Remote Starter Wiring Colors and Notes
Function	Vehicle Color	Location
Start:	YELLOW	IGNITION SWITCH HARNESS *
Ignition #1:	PINK	IGNITION SWITCH HARNESS
Ignition #2:	DK. GREEN	IGNITION SWITCH HARNESS
Ignition #3:	N/A
Accessory:	ORANGE	IGNITION SWITCH HARNESS
Brake Light:	WHITE	AT SWITCH ABOVE BRAKE PEDAL
Tach Signal:	WHITE	AT COIL MODULE ON TOP OF ENGINE
Parking Lights:	BROWN / WHITE OR BLUE	(+) IN LIGHT SWITCH HARNESS
Headlights:
Diesel Glow Plug:
Clutch Bypass Wire:
Notes:	* This Vehicle Is Equipped With GM's Passlock II Anti-Theft System. See Installation Note # 113 - Bypassing GM's Anti-Theft Systems.SPECIAL NOTE; FOR THE PARKING LIGHT WIRE. PLEASE DIODE ISOLATE YOUR PARKING LIGHT WIRE OR IT WILL CAUSE A SES LIGHT ON THE VEHICLE.

Chevrolet

Impala

2000-2002

Alarm and Keyless Entry Wiring Colors and Notes
Function	Vehicle Color	Location
Constant +12 Volts:	RED	IGNITION SWITCH HARNESS
OEM Alarm Disarm:
Dome Lights/Superv:	BLUE/WHITE (-)	IN LIGHT SWITCH HARNESS
OEM Horn:	BLACK (-)	STEERING COLUMN HARNESS
Power Lock:	ORANGE / BLACK	DRIVER'S KICK PANEL **
Power Unlock:	ORANGE / BLACK	DRIVER'S KICK PANEL **
Trunk Release:	BLACK (-)	AT SWITCH IN DASH
Alarm Input Wire:	BLUE/WHITE (-)	IN LIGHT SWITCH HARNESS
Notes:	** Single Wire Door Lock System. See Installation Note # 211 .Lock Requires A Ground (-) Pulse Through A 470 Ohm Resistor. Unlock Requires A Ground Pulse. Diode Isolate One Wire With The Band Facing Towards The Alarm/Remote Start Module

lscarfacel

Member - Posts: 4

Joined: December 30, 2004

Location: United States

Posted: January 13, 2005 at 2:56 PM / IP Logged

I m installing a BOA auto start is a 2000 impala...Everything works great except now for some reason the interior dimmer and basically all the interior lights are really low....maybe even off. Also the the parking lights dont stay on anymore at all. they still work like for example when you hit the lock unlock or start button on the remote they will blink but when u turn them on in the car(or even on auto) they do not work...the only thing that stays on are the headlights.... is this from the relay i used or could it be because i wired something wrong...Thanks... IM me if you have aol/aim..."IScarFacedI"

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2000 impala BOA

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.