Can a AMP be forced to do this?

Greetings all,

100 Watts RMS x 2 channels at 4 Ohms

And you wire up two 4ohm subs in parallel you would get an impedance of 2 ohms right?

Now if the amp was cooled with extreme measures, “for this question we will go with liquid nitrogen” It would be physically impossible to overheat it correct?

Would subs now be the point of failure? Or would this insane theory actually work

Just some thought provoking conversation

Laters

So since heat wouldnt be an issue, It would then be a mechincal failure on the amps part?

You are basically correct.  If you can dissipate the heat, it will "work."  In a super-cooled situation, you could place a very low resistance (much less than 0.01 ohms) on a transister output and it will deliver current as long as that current is available.  The power supply necessary to provide the current is the key once the cooling is taken care of.  No real practical application I can think of, and certainly none in any audio application, but it is theoretically possible.

Thanks to both of you,

I kind of thought it would work as long as you could power it and keep it cold, I agree it wouldnt be practical , but it would be one heck of a show to see and hear