Wiring Question

Home / the12volt's Install Bay / Car Audio / Wiring Question (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Sancho

Copper - Posts: 162

This member has made a donation to the12volt.com. Click here for more info.

Joined: August 05, 2004

Location: United States

Posted: January 05, 2005 at 9:10 AM / IP Logged

I got 1 ohm stable amp and sub which is dual 2 ohm...i only wanna know if there is difference in wiring or this is the same

Wiring Question -- posted image.

Head Unit:Alpine CDA 9835

6.5 MB Quart Pce 210

Amp:JBL 80.4

Amp:JBL 1200.1

Sub:Adire Brahma 12 MKII

the12volt

Administrator - Posts: 3,955

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 07, 2002

Location: Louisiana, United States

Posted: January 05, 2005 at 9:36 AM / IP Logged

If your diagram indicates that the amplifier is a 2 channel amplifier, then in the first figure, the amplifier will see a nominal impedance of 2 ohms per channel. In the second, the amplifier will see a nominal impedance of 1 ohm. If the diagram indicates two positive and two negative posts for a single amplifier channel, then in both figures the amplifier will see a nominal impedance of 1 ohm.

the12volt • Support the12volt.com

Sancho

Copper - Posts: 162

Joined: August 05, 2004

Location: United States

Posted: January 05, 2005 at 9:52 AM / IP Logged

this is mono amp so there is no difference, in both cases its gona be 1ohm right????

Head Unit:Alpine CDA 9835

6.5 MB Quart Pce 210

Amp:JBL 80.4

Amp:JBL 1200.1

Sub:Adire Brahma 12 MKII

stevdart

Platinum - Posts: 5,816

This member consistently provides reliable information

Joined: January 24, 2004

Location: Pennsylvania, United States

Posted: January 05, 2005 at 10:08 AM / IP Logged

(...sees opportunity to drag out old drawing...)

Yes, they are one and the same. Here is a diagram I made some time ago that shows that the terminals on the mono amp are connected (paralleled) inside the amp.

Wiring Question -- posted image.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Wiring Question

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.