valet 554

Home / the12volt's Install Bay / Car Security and Convenience / valet 554 (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

mbs17

Member - Posts: 5

Joined: December 19, 2004

Location: United States

Posted: January 06, 2005 at 11:01 AM / IP Logged

Just got a Valet 554, need to install on a 2005 tundra double cab. Do i need anything else for install? Also, how difficult is it to install, or should I pay to have it done?(never installed one before) What can i expect to pay if i dont install it? thanks

snguyen

Silver - Posts: 281

Joined: October 09, 2003

Location: United States

Posted: January 06, 2005 at 11:15 AM / IP Logged

Toyota

Tundra Double Cab

2005

Remote Starter Wiring Colors and Notes
Function	Vehicle Color	Location
Start:	BLACK/ White (+)	Ignition switch harness
Ignition #1:	BLACK/ Red (+)	Ignition switch harness
Ignition #2:	BLACK / YELLOW (+)	Ignition switch harness
Ignition #3:	N/A
Accessory:	Pink (+)	Ignition switch harness
Brake Light:	GREEN / WHITE or WHITE/ red(+)	Brake pedal switch
Tach Signal:	Black or Blue/White (AC)	ECM 2nd plug from right
Parking Lights:	Green (+)	Drivers kick panel
Headlights:	N/A
Diesel Glow Plug:	N/A
Clutch Bypass Wire:	N/A
Notes:

Toyota

Tundra Double Cab

2005

Alarm and Keyless Entry Wiring Colors and Notes
Function	Vehicle Color	Location
Constant +12 Volts:	WHITE/ Red or White (+)	Ignition switch harness
OEM Alarm Disarm:	YELLOW /GREEN(-)	Ign. Switch harness (keysense wire)
Dome Lights/Superv:	N/a
OEM Horn:	BLACK / YELLOW (-)	Steering column harness
Power Lock:	Blue/red (5)	Drivers kick Reverse polarity
Power Unlock:	RED / black(5)	drivers kick Reverse polarity
Trunk Release:	N/A
Alarm Input Wire:	N/a
Notes:	** See Note #201 Negative Trigger Door Locks

gtchida

Copper - Posts: 89

Joined: August 20, 2003

Location: United States

Posted: January 06, 2005 at 1:35 PM / IP Logged

If this is your first alarm install, it will be a challenge. Depending on what features you install will determine how much more you'll need (wiring, relays, etc).

Gary

gus1

Gold - Posts: 1,013

Joined: October 15, 2003

Location: Canada

Posted: January 06, 2005 at 5:21 PM / IP Logged

And, if you can figure out how to set the clock on the damn remote without wanting to throw it at the wall.... let me know. I've got another installer at one of our other shops that would lovetoknow (myself included)

Gus

Wherever I go, that is where I end up......

stevent

Copper - Posts: 68

Joined: December 12, 2002

Location: United States

Posted: January 06, 2005 at 5:29 PM / IP Logged

GUS1 Hold down the F key for five seconds and the remote will enter the menu to change the clock settings.

gus1

Gold - Posts: 1,013

Joined: October 15, 2003

Location: Canada

Posted: January 06, 2005 at 6:05 PM / IP Logged

Really? I thought it was more involved than that. I seem to remember a rather annoying sequence, follwed by accidentally hitting the wrong button and exiting the clock menu without doing anything, all accompanied by beeping. Hafta try again when we get some more of them in.

Gus

Wherever I go, that is where I end up......

kgerry

Platinum - Posts: 3,455

This member consistently provides reliable information

Joined: February 07, 2004

Location: Saskatchewan, Canada

Posted: January 07, 2005 at 9:06 AM / IP Logged

nope, thats the easiest feature ( among the 3247 available features ) to program on these units... press F button 5 secs and it goes into adjust clock mode

Kevin Gerry

Certified Electronics Technician

MECP First Class Installer

Owner/Installer

Classic Car Audio

since 1979

gus1

Gold - Posts: 1,013

Joined: October 15, 2003

Location: Canada

Posted: January 07, 2005 at 10:09 AM / IP Logged

Cool. I just remember sitting in Clarion training, and as Sanjay sent around the remote for the SR5000, and got to my table, the head installer in our Wpg. store(Ken Gingles) just goes " $5 if you can set the clock on it". Niether of us could figure it out, however the beeping and such was rather entertaining, and, as Sanjay put it "There's always one in every seminar"

Gus

Wherever I go, that is where I end up......

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

valet 554

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.