2000 Grand Prix PK3

Home / the12volt's Install Bay / Car Security and Convenience / 2000 Grand Prix PK3 (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

homey88

Member - Posts: 42

Joined: January 04, 2005

Location: Minnesota, United States

Posted: January 07, 2005 at 12:32 AM / IP Logged

I have a issue well maybe! Im using a jbs 791 Learning bypass/transponder and every thing works, car starts and works good but the security light stays on. Even after inserting key and turning to the "on" position and stays on untill i turn off the car. If i restart with key no light, only with remote start. Any ideas!!!!!

Brian

italnpimp59

Silver - Posts: 427

Joined: August 26, 2003

Location: United States

Posted: January 07, 2005 at 12:55 AM / IP Logged

did you pulse the keysense wire? that could be the problem

homey88

Member - Posts: 42

Joined: January 04, 2005

Location: Minnesota, United States

Posted: January 07, 2005 at 1:06 AM / IP Logged

This is how I hooked it up, except i didnt use a bulldog starter, i have a Crimestopper EZ90

Brian

italnpimp59

Silver - Posts: 427

Joined: August 26, 2003

Location: United States

Posted: January 07, 2005 at 1:07 AM / IP Logged

what alarm do you have, im pretty sure you have to power up the keysense wire

homey88

Member - Posts: 42

Joined: January 04, 2005

Location: Minnesota, United States

Posted: January 07, 2005 at 1:27 AM / IP Logged

I'm not sure if i know what a keysense wire is? at least at the moment anyway, the car has factory alarm/keyless and i put in the crimestopper EZ90/RS900 and the 791 bypass. at the moment the factory alarm is deactivated im going to go back under and hook up the arm/disarm function now that i found the wire location.

Brian

homey88

Member - Posts: 42

Joined: January 04, 2005

Location: Minnesota, United States

Posted: January 07, 2005 at 9:03 PM / IP Logged

Any Ideas!!!!!!!!!!!

Brian

jrilla

Gold - Posts: 1,498

This member has made a donation to the12volt.com. Click here for more info.

Joined: November 19, 2002

Location: North Dakota, United States

Posted: January 07, 2005 at 9:32 PM / IP Logged

I dont know if you need to hook it up or not, but the key sense wire is a lt.Green wire in the three pin connector with the starter wire.

J Rilla

Owner/Installer

homey88

Member - Posts: 42

Joined: January 04, 2005

Location: Minnesota, United States

Posted: January 08, 2005 at 12:42 AM / IP Logged

Ok one more ? , I dont have a 3pin connector i have a 8pim on the bypass and a 12pin on the starter. or is this 3pin ion the car somewhere?

Brian

jrilla

Gold - Posts: 1,498

Joined: November 19, 2002

Location: North Dakota, United States

Posted: January 08, 2005 at 9:24 AM / IP Logged

OOPS, I was looking at the 2004 Grand Prix. How many Lt. Green wires do you have? Just test them. It will be (-) when key is inderted.

J Rilla

Owner/Installer

homey88

Member - Posts: 42

Joined: January 04, 2005

Location: Minnesota, United States

Posted: January 09, 2005 at 12:50 AM / IP Logged

is this green wire in part of the car?

Brian

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.