pats bypass

Home / the12volt's Install Bay / Car Security and Convenience / pats bypass (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

Legrones

Copper - Posts: 75

Joined: April 17, 2003

Location: United States

Posted: January 10, 2005 at 7:14 PM / IP Logged

how do u bypass a pats bypass ....is ther any tricks to do it with out using a bypass transponder...a 1997 merk sable...is it likes gm vats just put a resistor in line or not ?

Dale / Cory

Back to Top

doug.b

Member - Posts: 18

Joined: December 29, 2004

Location: Canada

Posted: January 10, 2005 at 9:09 PM / IP Logged

all you need is a programed key and a relay terminal 86 hook to 12 volts terminal 85 ground out when running terminal87 take a long wire and wrap it about 7or8 times around chip in key then loop around ignition transponder 6or 7 times and tape it tight and hook the wire to terminal 30

good luck

doug.b

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

pats bypass

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.