the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

parking lights help


Post ReplyPost New Topic
< Prev Topic Next Topic >
vinh766 
Copper - Posts: 70
Copper spacespace
Joined: May 10, 2002
Location: United States
Posted: October 23, 2002 at 2:49 AM / IP Logged  
when i arm my car, the parking light feed from my alarm send positive feed like it should, so that my parking lights will blink. the problem is, i have a 97 eclipse and the parking light is a constant positive feed. they only turn on when it recieves a ground feed, so my question is, how can hook my parking wire up to my parking lights? becuase if my alarms gives off a positive feed to another positive feed, then nothing happens. thank you
brianh 
Silver - Posts: 516
Silver spacespace
Joined: August 25, 2002
Location: United States
Posted: October 23, 2002 at 7:08 AM / IP Logged  
all you need to do is get a relay.  Run your light flash wire to pin 85 on the relay.  Run pin 86 staight to ground.  Find the wire in the car that must see ground to turn the lights on and put that wire on pin 87.  Then take a wire staight to ground from pin 30.  That should do it.  BrianH.
vinh766 
Copper - Posts: 70
Copper spacespace
Joined: May 10, 2002
Location: United States
Posted: October 23, 2002 at 9:51 AM / IP Logged  
i tried that, but when the car is off, the ground is no feed for some reason, so that doesn't work either, unless you can tell me how to make the ground work when the car is off, i thought the ground always works, but i guess not.
brianh 
Silver - Posts: 516
Silver spacespace
Joined: August 25, 2002
Location: United States
Posted: October 23, 2002 at 10:26 AM / IP Logged  
Try looking for a GREEN / WHITE wire at  a  junction block (connector) or the dimmer switch.  This is the parking light wire, you should be able to hook your alarms output to this to turn on your park lights.  Try this and let me know if this works.  BrianH.
vinh766 
Copper - Posts: 70
Copper spacespace
Joined: May 10, 2002
Location: United States
Posted: October 25, 2002 at 12:10 AM / IP Logged  
but the GREEN / WHITE wire is a constant 12v, when it recieve another positive, nothing happens. so that's not going to work.
Sound Pressure 
Silver - Posts: 711
Silver spacespace
Joined: March 09, 2002
Location: United States
Posted: October 25, 2002 at 12:27 AM / IP Logged  
Check to see if your alarm has this feature. Some alarms have a selectable + or - light flash. Which at the brain or in internal programming you can select this.
Sound Pressure
You know you have the right amount of pressure when your eyes start to water! Now you've got Juice!
Montrealler 
Copper - Posts: 155
Copper spacespace
Joined: October 05, 2002
Location: Canada
Posted: October 25, 2002 at 4:39 AM / IP Logged  

Mitsubishi Eclipse 1997 stop searching go to kick panel (drivers)

       ITEM      |     WIRE COLOR     |POL|       WIRE LOCATION        |

|              12V|white               |+  |ignition harness            |
|          STARTER|BLACK/ red           |+  |ignition harness            |
|         IGNITION|BLACK/ white         |+  |ignition harness            |
|        ACCESSORY|blue/black          |+  |ignition harness            |
|       POWER LOCK|RED / blue            |-  |*1                          |
|     POWER UNLOCK|BROWN / red           |-  |*1                          |
|       LOCK MOTOR|blue/black          |   |drivers door harness        |
|     UNLOCK MOTOR|blue/red            |   |drivers door harness        |
|    DISARM DEFEAT|blue/red            |   |passengers door harness     |
| PARKING LIGHTS +|GREEN / WHITE         |   |in drivers kick             |
| PARKING LIGHTS -|GREEN / WHITE   22 awg|   |steering column *2          |
|       HEADLIGHTS|red                 |-  |steering column             |
|     DOOR TRIGGER|RED / green           |-  |in drivers kick *3          |
| DOME SUPERVISION|*4                  |-  |*4                          |
|  TRUNK/HATCH PIN|RED / green           |-  |driver kick panel *3        |
|         HOOD PIN|blue/black          |-  |fuse box                    |
|  FCTRY ALARM ARM|arms with lock      |   |                            |
|FCTRY ALRM DISARM|disarms with unlock |   |                            |
| DISARM NO UNLOCK|GREEN / WHITE         |-  |drivers door harness        |
|       TACHOMETER|white               |   |instument cluster or PCM *5 |
|       BRAKE WIRE|GREEN / WHITE         |+  |brake switch                |
|     HORN TRIGGER|GREEN/ black         |-  |steering column             |
|           WIPERS|blu/org(L),blu/blk(H|+  |steering column             |
|  LF WINDOW UP/DN|grn/red - grn/black |A  |in drivers door             |
|  RF WINDOW UP/DN|brn/yel - grn / YELLOW|A  |in drivers door or dkp      |

Notes:

*1 Located behind the glove box in a harness.  To unlock only thr drivers door on models with keyless entry. Use BROWN / blue negative(-) trigger at the relays behind the radio.  *2 Found in a gray 20-pin connector.  *3 To avoid the dome light delay use RED / white(-) at the door open indicator at the instrument cluster.  The RED / white will also catch the rear hatch.  *4 Use the RED / green door trigger wire for dome light supervision.  *5 The PCM is located on the drivers side of the engine compartment or behind the center of the dash depending on motor.

Yes I'm Back 2006...
vinh766 
Copper - Posts: 70
Copper spacespace
Joined: May 10, 2002
Location: United States
Posted: October 26, 2002 at 2:09 AM / IP Logged  
thank you so much, you were soo much help.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Sunday, May 12, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer