2005 Toyota Solara Remote Starter

Home / the12volt's Install Bay / Car Security and Convenience / 2005 Toyota Solara Remote Starter (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

profuse007

Gold - Posts: 2,015

Joined: October 20, 2002

Location: Texas, United States

Posted: February 21, 2005 at 7:03 PM / IP Logged

i would keep the fuse independently for future troubleshooting.

the keysense is at the key cylinder.

Houston,TX

"The two most common elements in the universe are H+ and stupidity" (Ellison).

jrilla

Gold - Posts: 1,498

This member has made a donation to the12volt.com. Click here for more info.

Joined: November 19, 2002

Location: North Dakota, United States

Posted: February 21, 2005 at 7:14 PM / IP Logged

Yeah the fuse should also be kept seperate so you can fuse it at 15 amps instead of 30.

Key sense is blue in a 4 pin connector right next to the main ignition harness connector at the switch.

J Rilla

Owner/Installer

tbird2340

Copper - Posts: 363

Joined: October 03, 2003

Location: Ohio, United States

Posted: February 22, 2005 at 9:34 AM / IP Logged

jrilla wrote:

As far s trunk switch and trunk motor side, you can guess or you can take a look at where the wires go and see which one heads toward the trunk, thats the motor. Be sure your 12v+ source is fused, because if you hook it up wrong, you will blow the fuse.

Horn wire is negative. It should read 12 volts at rest and 0 volts when horn sounds. It is GREEN/ Black at the fuse box connector D pin 11, or it can be found in the column in a black connector near the air bag connector.

Parking light positive is green at the fuse box at the C connector pin 4

Can I ask where you get this detailed information. With the info you gave me (Connector D pin 11, etc) I was able to find the wires in seconds rather then minutes / hours from diagrams on the net that just say the color and the approx location..

Thanks

tbird2340

Copper - Posts: 363

Joined: October 03, 2003

Location: Ohio, United States

Posted: February 27, 2005 at 1:20 PM / IP Logged

I seem to be having a problem with the security on the vechicle.. If I wait about 5 minutes and try to do a remote start the horn starts going off..

I have the keysense wire hooked up to the bypass (which has a keysense wire). I also tried hooking the disarm wire of the remote start unit to the keysense wire and it still happens..

Any ideas?

profuse007

Gold - Posts: 2,015

Joined: October 20, 2002

Location: Texas, United States

Posted: February 27, 2005 at 2:20 PM / IP Logged

try using a status wire that show constant (-) when RS.

Houston,TX

"The two most common elements in the universe are H+ and stupidity" (Ellison).

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2005 Toyota Solara Remote Starter

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.