Ungo sr5000

Home / the12volt's Install Bay / Car Security and Convenience / Ungo sr5000 (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

goshred025

Member - Posts: 7

Joined: January 19, 2005

Posted: January 19, 2005 at 4:59 AM / IP Logged

Hi just recenty i was working in my car and the alarm armed in my pocket. Then the led light turned to a stoped flashing and was constantly on. I also noticed that on my 2way pager it shows a bunch of ZzZz and according to the owners manual it says it in valet mode, Im able to arm and disarm my car like normal but their is not Chirp. After reading that book up and down i couldent find out how to take it out. Ive tried calling them but no luck they gave me the run around on their operators. Does anyone know how to take it out of Valet mode.

TIA

meh66

Copper - Posts: 266

This member has made a donation to the12volt.com. Click here for more info.

Joined: October 26, 2003

Location: United States

Posted: January 19, 2005 at 2:27 PM / IP Logged

If you connected the valet push button switch, all you have to do is within ten seconds of taking the key out of the ignition switch press the button. You should see your LED go out.

MEH66

"Car Performance and Mobile Electronic Enthusiats"

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Ungo sr5000

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.