Autostart Username

I need schematics from autostart but we need to be a dealer to access them, does anyone have an autostart username & Password ? Thanks in advance.

What manual do you need ? I'll see what I can do for you.Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

wiring for a 2001 Toyota Celica (for a remote starter), the one from directech doesnt contain enough details.... there are like 200 wires connected to the ecm, and I know autostart offers location and often pictures where the wires are located.

just curious... did you honestly expect an authorized dealer to just give you his user name and password????Kevin Gerry

Certified Electronics Technician

MECP First Class Installer

Owner/Installer

Classic Car Audio

since 1979

well, I used to have one but they changed the site last year and it doesnt work anymore

There should be no reason that you would need any other info other then the info from DEI to do a remote start. Use your meter. Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

if you saw the interior of that car you wouldnt say that, there is no space and a lot of wires of the same color, of course i use my meter, i just wanted a little help.... thanks anyway

Some of the sites also require you to have a serial# of th eunit you are working with, no serial#, no access. Top Secret, I can tell you but then my wife will kill me.

Let's say .... I got have too good knoweldge about Autostart. All user/Install Guide are free of access thru the web site. If you bought any product from the Autostart Family keep the serial number (12 Digits) for a free web access to their Database. Also to be Kind there is a wiring chart Any question About Autostart Ask Me! 12V|blk/red & white |+ |ignition harness            | STARTER|BLACK/ white |+ |ignition harness            | IGNITION|BLACK/ orange *1 |ignition harness            | SECOND IGNITION|blue/red *4 ignition harness ACCESSORY|gray   |+ |ignition harness            | POWER LOCK|brown      - |passenger kick or BCM *2    | POWER UNLOCK|yellow/black - passenger kick or BCM *2    | PARKING LIGHTS +|use the (-) wire    |    PARKING LIGHTS -|lt. green steering column             TRUNK/HATCH PIN lt. green -|trunk light or BCM *2       FCTRY ALARM ARM|arms with lock      |    FCTRY ALRM DISARM|disarms with unlock |    TACHOMETER|BROWN / white|rear of instrument cluster | BRAKE WIRE|GREEN / WHITE + |brake switch               HORN TRIGGER|blue/black - |steering column or BCM *2   WIPERS|blu/yel & blu/orn   |+ |steering column| SUN RF OPN/CLOSE|not recommended     |    Notes: *1 When doing remote start, this wire must be isolated from the keyswitch with the ignition relay. *2 The BCM is located just to the right side of the radio. Remove the radio to access. *3 To avoid dome light delay, use RED / yellow at the driver door pin for the driver door and red at the passenger door pin for the passenger door. Isolate each door trigger with diodes. *4 There are 2 blue/red wires in the ignition harness. The correct ignition wire is the heavier gauge one and it has 1 silver hash mark. The incorrect wire has 2 silver hash marks. Yes I'm Back 2006...