Missing wires for 6.5LCD

Home / the12volt's Install Bay / Mobile Video, GPS, and Navigation / Missing wires for 6.5LCD (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

DukeDuke

Silver - Posts: 206

Joined: November 01, 2003

Location: United States

Posted: January 21, 2005 at 8:06 AM / IP Logged

I purchased a 6.5 inch LCD off of the bay, and the dude didnt send me any wires, but it has an output wire, it looks like a S-video wire, does anyone have any ideas how I could wire is? If I can cut the tip off and hard wire it I will... or if someone has a extra wire harness laying around that they could sale, let me know please! coming from the wire to inside of the housing, there are 6 wires, but 2 sets(4 wires) of them are spliced into 1 set(2 wires) about a inch after the connecter, that connects onto the board. so there are really only 4 wires. If you can help please let me know! Thanks! P.S. No idea what brand it is, the idiot spray painted all the trim silver. and covered everything up! Thanks! As well, there are no signs on the board at all about what slot of the connecter is what. Thanks!

Duke Duke

Jay T

Copper - Posts: 169

Joined: December 02, 2003

Location: Canada

Posted: January 21, 2005 at 2:44 PM / IP Logged

What colour are the wires? If its a real 12 volt screen, you really only need a couple wires to make it work. Power, Ground, And a wire thats supposed to be grounded to the EBrake. If these are missing you'll have to trace them back internally.

Can you send this thing back?

DukeDuke

Silver - Posts: 206

Joined: November 01, 2003

Location: United States

Posted: January 21, 2005 at 2:56 PM / IP Logged

there is the pink and black that go into red, then there is blue and black that go into black, then there is another black, and a brown and another black that isn't in the harness, it is soldered to the connection... It isn't that simple to say, red is pos, blk is neg., because I have to have the video input somewhere... and I am not sure which it is. If you want me to take a picture I can, if that will help explain it some more

Duke Duke

DukeDuke

Silver - Posts: 206

Joined: November 01, 2003

Location: United States

Posted: January 24, 2005 at 7:09 AM / IP Logged

Come on now, I know how many installers are on this page, I know someone will be able to tell me if it is possible or not, as well as if it is, how to do it or atleast what the wire colors are! Thanks!

Duke Duke

Jay T

Copper - Posts: 169

Joined: December 02, 2003

Location: Canada

Posted: January 24, 2005 at 5:54 PM / IP Logged

If you can take a picture it might make more sense. IE which end is which. PM me I'll give you my emal address and you can try and send a picture.

Jay T

Copper - Posts: 169

Joined: December 02, 2003

Location: Canada

Posted: January 24, 2005 at 7:03 PM / IP Logged

Your PM inbox is full. Send the pics here: nocheeks@hotmail.com

I'll see what I can figure out.

DukeDuke

Silver - Posts: 206

Joined: November 01, 2003

Location: United States

Posted: January 25, 2005 at 12:20 AM / IP Logged

All right bro, I sent them to your e-mail, an hour or so ago! Hope you got them, thanks for the help!

Duke Duke

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Missing wires for 6.5LCD

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.