problem with autopage rs650 plus

Home / the12volt's Install Bay / Car Security and Convenience / problem with autopage rs650 plus (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

fexploder

Member - Posts: 7

Joined: January 07, 2005

Location: United States

Posted: January 24, 2005 at 11:08 PM / IP Logged

I recently installed an autopage rs650 plus remote start and alarm in my 1999 ford explorer. The alarm works fine but the that i had to hook up for my third ignition wire is getting no signal from the alarm. I have checked and tested all wires and when testing the orange wire from the alarm it had no signal when i hit the start button.

ANY information or advice would be helpful

Back to Top

fexploder

Member - Posts: 7

Joined: January 07, 2005

Location: United States

Posted: January 24, 2005 at 11:10 PM / IP Logged

that is the relay i hooked up

Back to Top

metaverse

Copper - Posts: 210

Joined: June 13, 2002

Location: United States

Posted: January 25, 2005 at 11:08 AM / IP Logged

The yellow wire on harness H5 which is a -200ma relay trigger wire for ignition 3. Check your install manual..it says so. Orange wire is always a ground output when armed..used for starter kill relays and/or anti-grind circuitry. Look at the diagram on page 9 of your install manual..it gives you some cartoons to work with..

Wire it up with pole 86 to the yellow wire. Pole 85 and 87 to fused 12v and pole 30 to the third ignition wire.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

problem with autopage rs650 plus

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.