sub box insulation

Home / the12volt's Install Bay / Car Audio / sub box insulation (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

Next Page > < Prev Topic Next Topic >

ippy98

Member - Posts: 25

Joined: January 23, 2005

Location: United States

Posted: January 30, 2005 at 7:49 PM / IP Logged

for a sealed box is it best to insulate the inside walls of the box with something? i don't nessecarily mean stuff it but at least cover the walls with either fiberglass or dynamat or anything on the inside? i will be using 3/4" MDF for the box....whats everyones thoughts on the insides?

Back to Top

supradude

Silver - Posts: 915

Joined: September 21, 2004

Location: South Carolina, United States

Posted: January 30, 2005 at 9:08 PM / IP Logged

I never put anything inside the ones that I build. If it is too small for the sub you can put some polyfill in it and make it sound better.

'85 Toy

Back to Top

ippy98

Member - Posts: 25

Joined: January 23, 2005

Location: United States

Posted: January 30, 2005 at 9:27 PM / IP Logged

what is the best thing to use to seal the edges to make sure its air tight?

Back to Top

spootydlux4

Copper - Posts: 149

Joined: October 03, 2004

Location: United States

Posted: January 30, 2005 at 9:37 PM / IP Logged

i use silicon caulk

blah blah blah blah

Back to Top

spootydlux4

Copper - Posts: 149

Joined: October 03, 2004

Location: United States

Posted: January 30, 2005 at 9:37 PM / IP Logged

i use silicon caulk but make sure you let it

blah blah blah blah

Back to Top

spootydlux4

Copper - Posts: 149

Joined: October 03, 2004

Location: United States

Posted: January 30, 2005 at 9:37 PM / IP Logged

i use silicon caulk but make sure you let it cure

blah blah blah blah

Back to Top

spootydlux4

Copper - Posts: 149

Joined: October 03, 2004

Location: United States

Posted: January 30, 2005 at 9:37 PM / IP Logged

i use silicon caulk but make sure you let

blah blah blah blah

Back to Top

spootydlux4

Copper - Posts: 149

Joined: October 03, 2004

Location: United States

Posted: January 30, 2005 at 9:37 PM / IP Logged

i use silicon caulk but make sure you let it cure

blah blah blah blah

Back to Top

spootydlux4

Copper - Posts: 149

Joined: October 03, 2004

Location: United States

Posted: January 30, 2005 at 9:37 PM / IP Logged

i use silicon caulk but make sure you let it cure at least 12 hrs before

blah blah blah blah

Back to Top

spootydlux4

Copper - Posts: 149

Joined: October 03, 2004

Location: United States

Posted: January 30, 2005 at 9:37 PM / IP Logged

i use silicon caulk but make sure you let it cure at least 12 hrs before puttin t

blah blah blah blah

Back to Top

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.