Performance teknique alarm/rs

Home / the12volt's Install Bay / Car Security and Convenience / Performance teknique alarm/rs (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

supra9059

Member - Posts: 1

Joined: January 26, 2005

Location: United States

Posted: February 02, 2005 at 2:20 PM / IP Logged

I installed a performance teknique alarm/rs on a 99 suburban. everything works fine for a day or so and then the remotes freeze up, can't disarm, alarm, or start. any help would be appreciated.

Clayton Martin

Preferred Amsoil dealer

thepencil

Gold - Posts: 1,526

Joined: December 16, 2002

Location: Canada

Posted: February 02, 2005 at 3:01 PM / IP Logged

Check your kill switch if you got one. Check hoodpin and that they are all secure. Unplug all the fuse on the alarm and starter unit, check your fuse and make sure they are all working. Wait a few minute before you plug everything back to the unit. Post your finding.

Be careful whose advice you buy, but be patient with those who supply it. Performance teknique alarm/rs -- posted image.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Performance teknique alarm/rs

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.