95 explorer tach wire

Home / the12volt's Install Bay / Car Security and Convenience / 95 explorer tach wire (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

Absolute Audio

Member - Posts: 21

Joined: January 03, 2005

Location: Washington, United States

Posted: February 06, 2005 at 11:07 AM / IP Logged

having a hard time getting my viper 1500esp to read the tach signal

can anyone send me a picture of the wire?

or is there something special that i didn't do that i should have done?

also is there anohter location besids the PCM (same as ECU? plugs into firewall?)

thanks in advance

Back to Top

Search for other posts by Absolute Audio

KarTuneMan

Platinum - Posts: 7,056

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: December 14, 2004

Location: Isle Of Man

Posted: February 06, 2005 at 12:46 PM / IP Logged

Go to the coil.....tan / YELLOW

Back to Top

thepencil

Gold - Posts: 1,526

Joined: December 16, 2002

Location: Canada

Posted: February 07, 2005 at 8:33 AM / IP Logged

At the PCM. There is a 10 mm bolts holding the plug with all the wires in it. There are more that ONE TAN / YELLOW wire in that plug. The hardest to reach TAN / YELLOW wire is the correct one. If you unbolt the plug TAN / YELLOW wire is nearest to the bottom of the plug. It will meter between 4-6 Volts AC.

FORD, EXPLORER, 1995, Tachometer

The PCM is located at the top of the firewall towards the passenger side, the tan / YELLOW tach wire is also found at the back of the instrument cluster.

Be careful whose advice you buy, but be patient with those who supply it. 95 explorer tach wire -- posted image.

Back to Top

Absolute Audio

Member - Posts: 21

Joined: January 03, 2005

Location: Washington, United States

Posted: February 07, 2005 at 9:57 AM / IP Logged

the PCM is in the engine bay side of the firewall correct?

i did not see any tan / YELLOW wires at the coil?

how do i access the back of the cluster without pulling the dash apart more? would i need to pull the cluster out?

i want to make as many in cab connections as i can

Back to Top

thepencil

Gold - Posts: 1,526

Joined: December 16, 2002

Location: Canada

Posted: February 07, 2005 at 10:32 AM / IP Logged

"the PCM is in the engine bay side of the firewall correct?"

Yes, if you open up the hood. Go to the passenger side you will see it. It's a BIG plug with a million wire attach to it.

Be careful whose advice you buy, but be patient with those who supply it. 95 explorer tach wire -- posted image.

Back to Top

Absolute Audio

Member - Posts: 21

Joined: January 03, 2005

Location: Washington, United States

Posted: February 07, 2005 at 10:58 AM / IP Logged

cool ill try that...guess i might as well extend my siren wire over there too then..

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

95 explorer tach wire

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.