Passlock help

Home / the12volt's Install Bay / Vehicle Wiring Information & File Requests / Passlock help (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

stiverp

Member - Posts: 16

Joined: September 11, 2004

Location: United States

Posted: February 06, 2005 at 1:40 PM / IP Logged

I've installed a DEI 552t along with a 555L on a 2002 Saturn L200. I've checked and rechecked the wiring, read the directions several times and still the vehicle tries to crank but then immediately shuts down. I need some help as to I'm at a dead end. Really wondering if the 555L is bad. I have not set up a neg to neg relay and am not sure if the 552t is sending a neg output. Tried the blue and the blue/black wire. Anyone got any ideas.

Back to Top

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: February 06, 2005 at 4:52 PM / IP Logged

The BLACK wire you must GROUND and the BLUE/BLACK wire you have to attach to the (-) when remote started wire from the 555T unit. Did you get a confirmation that the module learned the R-Code properly ?

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Back to Top

Search for other posts by Velocity Motors

stiverp

Member - Posts: 16

Joined: September 11, 2004

Location: United States

Posted: February 06, 2005 at 7:23 PM / IP Logged

Jeff, What do you mean about the confirmation of learned R-code? It didn't mention anything about a confirmation, it only says to let the vehicle run for greater than 5 sec. So, to ensure a sold ground on the black wire should I ground directly to the vehicle and not the bcm ground? Thanks, Stiver

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Passlock help

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.