10's in my std cab Tacoma?

I just got a standard cab '95 Tacoma (so I'm very pressed for space). As of now, I'm looking at putting something along the lines of this Kicker Comp CVR102 and this Profile AP600. I think the most space I'm going to be able to make is about 0.85 cu.ft. I've got a budget of about $200, and I'm wanting this little truck to really bump. So I'm looking for a lot of SPL, but don't want the music to be like one continuous bass line. Anyone have any feedback on this setup? Any suggestions on different components? Reviews of Profile amps? Another option would be to put a IDQ10 V.2 in a ported box and just run about a 200rms/400peak amp.

if this is your budget I would stay with this but this setup is not going to give you great bass but the 10's are going to give you nice tight bass in a sealed box

Re: above they have all kind of info for tacomas on their forums section. there are a couple of installs in the interior/audio forum. good luck

MTX thunderform enclosure.....1cu.ft.sealed for a 10  It takes up 3/4 of the back wall, leaving the rest for an amp mount. full movement of the seat too

how much headroom do you have in it?  im not very tall so i always thought the tacoma's cab was a bit tall.  you could build boxes under the seat and raise the seats.  you could put a 12 get the same volume, get a good massage, and let the box extend back behind the seat some if you need more roomPioneer PEH-9660mp

Mb Quart PCE-216 biamped

JL 12W6v2

Sony XM-4026 amp for tweeters

Kenwood KAC-7251 amp for mids

JL-4100 amp for sub