Crankshaft Sensor for Tach signal?

Home / the12volt's Install Bay / Car Security and Convenience / Crankshaft Sensor for Tach signal? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

srusin1

Copper - Posts: 86

Joined: September 28, 2004

Posted: February 07, 2005 at 7:03 PM / IP Logged

Can you use the Crankshaft or Camshaft Position sensors for the tach refernece hook up at the ECM

Back to Top

KarTuneMan

Platinum - Posts: 7,056

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: December 14, 2004

Location: Isle Of Man

Posted: February 08, 2005 at 3:24 AM / IP Logged

If I were you...I wouldn't try and re-invent the wheel...Use good tech support and go with that as far as a tach signal location is concerned. If you have the time and the knowledge, go for it. Make sure you share your findings.

Everyone appreciates having alternate info

Back to Top

NowYaKnow

Gold - Posts: 1,217

Joined: December 18, 2002

Posted: February 08, 2005 at 6:03 AM / IP Logged

"Can you use the Crankshaft or Camshaft Position sensors for the tach refernece hook up at the ECM"

Yes normally you can we use these on some vehicles..

Mike

Back to Top

srusin1

Copper - Posts: 86

Joined: September 28, 2004

Posted: February 09, 2005 at 12:35 AM / IP Logged

anyone else

Back to Top

profuse007

Gold - Posts: 2,015

Joined: October 20, 2002

Location: Texas, United States

Posted: February 09, 2005 at 1:00 AM / IP Logged

am not sure what crank or cam sensor does but i came across the analog tachnometer where it reads the cam/crank to reference engine RPM.

Houston,TX

"The two most common elements in the universe are H+ and stupidity" (Ellison).

Back to Top

srusin1

Copper - Posts: 86

Joined: September 28, 2004

Posted: February 09, 2005 at 8:55 PM / IP Logged

I think it works on AC voltage.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Crankshaft Sensor for Tach signal?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.