'05 F250 Powercode install

Home / the12volt's Install Bay / Car Security and Convenience / '05 F250 Powercode install (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

05Lariat

Member - Posts: 3

Joined: February 01, 2005

Posted: February 12, 2005 at 12:46 AM / IP Logged

Hello gurus!

I need help with installing this alarm/remote start into my 05 6.0 diesel, specifically the tach source. I have the wiring diagrams, and have found the factory grn/wht tach wire behind the fuse box. Problem is, my DMM is showing 26 or so volts AC, going up to 27 or so with reved throttle when I test the wire. My test procedure: truck off, red probe to wire, black probe to chassis ground. Start engine, reading jumps to mid 20's ac. Double checked with an older analog meter, same results.

I don't want to hook anything up until I resove this test problem. On another note, does anyone know a source for the tach inverter/booster unit I might need to hook up to the tach wire if the signal is to weak? I have tried Ford-key and Code Alarm directly, along with local shops. No one can seem to locate this part for me. Ford part number is 102818-2

The rest of the install seems pretty straightforward. Thanks for any help you can provide!

Matt

Back to Top

inst1700

Member - Posts: 3

Joined: January 22, 2005

Location: Canada

Posted: February 12, 2005 at 1:03 PM / IP Logged

If you can program your remote start for voltage sensing do that. it works better than tach sensing for fords

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

'05 F250 Powercode install

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.