alarm to trunk actuator via relay

Home / the12volt's Install Bay / Relays / alarm to trunk actuator via relay (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

83malibuRida

Member - Posts: 46

Joined: January 21, 2005

Location: Georgia

Posted: February 17, 2005 at 12:29 PM / IP Logged

I originally posted this in the alarm forum but it has kind of turned into a relay problem and I am now officially frustrated.

background: I have a DEI rattler model 300 w/ two button transmitter. The alarm was already installed when I bought the car 3 years ago and I do not have any instructions or user guides to help. I recently installed a trunk lock kit and I wanted it to run or be activated by the alarm keypad. From a previous post I found out that there is a (-) negative output from the alarm brain when buttons I & II are pressed together. I was told to get a 30amp 12v 5 pin relay and connect the the following pins:\

pin 85-RED / white wire coming out of brain pin 86-12 v pin 30-12 v pin 87- trunk solenoid

is this right? I did all the nessacery connections what is happening.

I have one terminal of the solenoid grounded in the trunk and the other wire going into the relay. is it enough amperage to drive the solenoid its rated at 45

Nick Scott

Back to Top

auex

Platinum - Posts: 5,041

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 23, 2002

Location: Arizona, United States

Posted: February 17, 2005 at 3:03 PM / IP Logged

Yes, it is right.

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

alarm to trunk actuator via relay

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.