Kill Switch Relay

Home / the12volt's Install Bay / Car Security and Convenience / Kill Switch Relay (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

juanpito

Member - Posts: 43

Joined: February 09, 2005

Location: United States

Posted: February 19, 2005 at 5:51 AM / IP Logged

How do you test the kill switch relay. It's was working before, when the alarm goes off I wasn't able to start my car. Now with the alarm going off I'm able to start my car. Is it possiable that the switch went bad!!!! Kill Switch Relay -- posted image.

If anybody has any idea please let me know.

Juan67

Back to Top

shoelesscraig

Member - Posts: 43

Joined: August 16, 2004

Posted: February 19, 2005 at 6:47 AM / IP Logged

Well, if it was working before and now its not, yeah, I'd say it went bad. It's very possible for a switch or relay to go bad. It is probably just stuck in the normally closed position, therefore you can start that car all the time no matter what. Try replacing relay.

Back to Top

CBill

Member - Posts: 28

Joined: December 21, 2004

Posted: February 19, 2005 at 10:41 AM / IP Logged

I think kill relay switch are normally open but closed when arm is armed breaking the circuit from the key to the starter .. so I would look at that "grounded when arm" wire and make sure it didn't break off from the relay switch .. maybe t-tap came lose or something ..

I had relay switch gone "bad" but it still very rare for that to happens so check that "grounded when armed" wire first before replacing the relay switch ..

Bill

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Kill Switch Relay

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.