New guy need help!

Home / the12volt's Install Bay / Car Audio / New guy need help! (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

cobra guy

Member - Posts: 5

Joined: February 21, 2005

Location: United States

Posted: February 23, 2005 at 5:57 PM / IP Logged

Well the gain is only up to 1/4 on the dial, and yes they are 4 ohm DVC's.

customsuburb, how would i wire the subbs to achive 3ohms bridged? Right now they are going to both channels on the amp so they are not bridged.

Does anyone think that stupid cap could have anything to do with it? Thanks again.

Back to Top

forbidden

Platinum - Posts: 5,352

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

Joined: November 01, 2003

Location: Alberta, Canada

Posted: February 23, 2005 at 8:31 PM / IP Logged

The cap has nothing to do with it. The subs cannot be wired to 3 ohms or 2 ohms, only 1, 4 or 16. Use this method to wire the subs to the amp. As was pointed out, the /1 series amps are basically a "governed" amplifier making full rated power at 4,3 or 2 ohms or any point in between.

Wiring Option #2

New guy need help! - Page 2 -- posted image.

At what level is the sub control set at on the cd player and at what volume level is the cd player at out of maximum when the subs cut out? Is the bass on the cd player turned up. Where is the ground on the amp attached to the vehicle.?

Top Secret, I can tell you but then my wife will kill me.

Back to Top

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

New guy need help!

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.