What Amp?

Home / the12volt's Install Bay / Car Audio / What Amp? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

Quik21

Member - Posts: 9

Joined: February 22, 2005

Posted: February 23, 2005 at 12:02 AM / IP Logged

i got 2 kenwood typhoon 10" subs. 800w max 400w rms 4 ohms. http://www.shopping.com/xPF-Kenwood_Kenwood_KFC_W3009_12_4_ohm_Component_Subwoofer_12_Component_Subwoofers

what kind of amp should i get for these? they are in a sealed box in the back of a 00 dodge neon. im lookin to spend about 2-300 but if i need to spend more i will. thanks

Back to Top

wheelerdr

Copper - Posts: 337

Joined: October 25, 2004

Location: Louisiana, United States

Posted: February 23, 2005 at 5:16 AM / IP Logged

you can get a kenwood excelon 811d for 235.00 900 watts at 2 ohm run your subs in a parallel to get your 2 ohms

you get this amp at locustaudio.com

Back to Top

Quik21

Member - Posts: 9

Joined: February 22, 2005

Posted: February 23, 2005 at 8:47 AM / IP Logged

just to clarify running them at 2 ohms wont hurt the amp or the speakers since the speakers are 4ohms each correct?

Back to Top

pimpincavy

Silver - Posts: 880

Joined: May 20, 2004

Location: United States

Posted: February 23, 2005 at 1:25 PM / IP Logged

Are those subs SVC or DVC? If they are DVC they cannot be ran at 2 ohms.

Back to Top

customsuburb

Gold - Posts: 1,813

Joined: January 17, 2004

Location: United States

Posted: February 23, 2005 at 1:47 PM / IP Logged

I doubt those Kenwood subs would handle (or need) 400 real watts a peice.

Back to Top

Quik21

Member - Posts: 9

Joined: February 22, 2005

Posted: February 23, 2005 at 2:01 PM / IP Logged

i messed up the subs are Kenwood KFC-W2503. here are the specs i can find

pearl mica injection-molded polypropylene woofer cone

tornado-type raised ridge construction for improved rigidity and dampened resonance

foam surround

extended pole piece and bumped back plate for increased cone excursion

power range 35-130 watts RMS

peak power handling: 500 watts

frequency range 28-800 Hz

sensitivity 91 dB SPL

top mount depth: 4-1/2"

there are 2 of them. if i find better specs i'll post. thanks and sry for the confusion

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

What Amp?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.