Wiring diagram 2003 Toyota Matrix

Hi craftsmann, I don't have any info for a 2003 Matrix, but If you're only adding power locks, besides wiring the actuators to the switches, all you'll need to connect to in the vehicle is a constant 12V+ source (battery positive) and ground (vehicle chassis).

the12volt

What do you need as far as colors go ? If you are adding door lock actuators all you will need is power and ground with the switch you are installing. Are you installing a remote keyless entry as well ?

All you will need is the constant, a ground and the two wires coming off the door lock actuators. If the keyless entry module require more than just these connections you can you can use your DMM to figure out the wires.

Jando can I get a copy of that Matrix diagram too?

Thanks

Oz

Jando can I get a copy of that 2003 Matrix diagram too? I just bought my wife a new matrix for Christmas. If I may, I also have a 2001 Toyota Prius and would like a wiring diagram for this also. I would like to outfit both with an alarm system.

Thanks

Tony

Jando I was trying to install a couple relays to make the the Factory RS3200+ beep for lock and unlock. The info somebody provided me did not match, i took the driver kick panel apart, the passenger kick panel apart and the colors did not match, i only found one of the four wire i was supposted to use and it wasn't the color i was told.

Can you help me ?

Thanks in advance

Oz