Horn Switch using Relays

Home / the12volt's Install Bay / Relays / Horn Switch using Relays (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

kdoe74

Member - Posts: 1

Joined: February 25, 2005

Location: United States

Posted: February 25, 2005 at 5:22 PM / IP Logged

I have a keyless entry system set up so that the horn triggers with every lock/unlock. I have two additional negative auxiliary outputs on this system that are unused.

I would like one aux to disable the horn chirp. This should be a constant disable and not temporary. The second aux would enable the horn chirp (constant enable). The horn has a negative trigger. I thought about using the latch on/off diagram, but I would like to use two separate buttons.

Thanks for the help.

Back to Top

Montrealler

Copper - Posts: 155

Joined: October 05, 2002

Location: Canada

Posted: February 26, 2005 at 5:14 AM / IP Logged

Use a latching relay. This relay will change position and remain like this until next trigger.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Horn Switch using Relays

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.