1995 dodge ram alarm install

Home / the12volt's Install Bay / Car Security and Convenience / 1995 dodge ram alarm install (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

KBToys

Copper - Posts: 74

Joined: November 21, 2002

Location: United States

Posted: February 26, 2005 at 11:18 AM / IP Logged

Going to be installing a K9 alarm in a 95 dodge ram and had a few questions. First I am not sure what type of door lock they are. From what I understand they differ if you have a factory keyless entry or not. The truck was bought used so I don't know. Second when installing the starter disable which wire do I use? The digram show an ingnation 1 and an ingantion 2 wire.?

Thanks

Kai

boomer_106

Silver - Posts: 710

Joined: November 25, 2003

Location: United States

Posted: February 26, 2005 at 11:34 AM / IP Logged

Dodge

Ram Pickup

1994-1995

Remote Starter Wiring Colors and Notes
Function	Vehicle Color	Location
Start:	YELLOW (##)	DARK BLUE / YELLOW (#) IGN SW HARNESS
Ignition #1:	DARK BLUE	IGNITION SWITCH HARNESS
Ignition #2:	BLACK/ ORANGE	IGNITION SWITCH HARNESS (HEAT - A/C)
Ignition #3:	N/A
Accessory:	BLACK/ WHITE	IGNITION SWITCH HARNESS (RADIO/WIPER)
Brake Light:	WHITE/ TAN (+)	AT SWITCH ON BRAKE PEDAL BRACKET
Tach Signal:	GRAY/LIGHT BLUE	AT POWERTRAIN CONTROL MODULE *
Parking Lights:	BLACK / YELLOW (+)	AT HEADLIGHT SWITCH **
Headlights:	LIGHT GREEN (+)	HEADLIGHT SWITCH OR BEAM SELECT SW.
Diesel Glow Plug:
Clutch Bypass Wire:
Notes:	* Powertrain Control Module (PCM) Located On Firewall Next To Passenger Hood Hinge. GRAY/L BLUE Wire Located At Pin #43.

Dodge

Ram Pickup

1994-1995

Alarm and Keyless Entry Wiring Colors and Notes
Function	Vehicle Color	Location
Constant +12 Volts:	RED AND PINK/BLACK	IGNITION SWITCH HARNESS
OEM Alarm Disarm:	N/A
Dome Lights/Superv:	YELLOW (-)	DRIVER PIN SWITCH **
OEM Horn:	BLACK/ RED (-)	STEERING COL HARN OR BEAM SELECT SW.
Power Lock:	ORANGE / VIOLET	CONNECTOR ON UPPER LEFT SIDE OF
Power Unlock:	PINK/VIOLET	JUNCTION BOX BEHIND PARK BRAKE ***
Trunk Release:	N/A
Alarm Input Wire:	YELLOW (-)	DRIVER PIN SWITCH **
Notes:	Both Circuits Also Found In 10 Pin Black Connector Behind Fuse Block. * See Note #203 - Reverse Polarity Door Lock Diagram.

iskidoo

Silver - Posts: 1,040

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 08, 2002

Location: Maine, United States

Posted: February 26, 2005 at 2:15 PM / IP Logged

KBToys wrote:

Use the Yellow (may also be Blue / YELLOW) wire for Starter disable not an Ignition wire. Use Dark Blue for Ignition and use BLACK/ Orange for your Accessory. Only use BLACK/ White if you want the radio and wipers to come on during remote start. I recommend you leave the BLACK/ White unconnected so that if your wipers are frozen to your windshield and they were left on the night before, you don't damage the wiper arm when it tries to work and it's frozen to the windshield. I like to have the radio and accessories turn on when I finally get in the vehicle and turn the key on.

http://directechs.com/directwire/wire_body.asp?action=select&yr=952&product=Remote%20Start

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

1995 dodge ram alarm install

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.