Giordon 686 with remote start

Home / the12volt's Install Bay / Car Security and Convenience / Giordon 686 with remote start (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

Thomas.

Member - Posts: 2

Joined: February 27, 2005

Location: Denmark

Posted: February 27, 2005 at 2:22 PM / IP Logged

Hi.`

I´m from Denmark so my english is not so good.

I have bougth a Giordon alarm with remote start. I have a problem with the engine starter. It stil runs 2-3 sec. after i have startet the engine with the remote. Can i adjust the alarm, so the starter dosent run so long?

Hope somone can help me...

Back to Top

ywdb

Member - Posts: 42

Joined: September 04, 2002

Location: Japan

Posted: February 27, 2005 at 6:57 PM / IP Logged

Hi,Thomas;

Pls check your "Giordon alarm" Violet wire connect to vehicle Tachometer wire or not?

Remote engine start run time is 8 min.

Good luck!

Back to Top

Thomas.

Member - Posts: 2

Joined: February 27, 2005

Location: Denmark

Posted: February 28, 2005 at 10:03 AM / IP Logged

Hi ywdb

The Violet wire is connect to vehicle Tachometer wire.

what do you mean with: "Remote engine start run time is 8 min"

Back to Top

iskidoo

Silver - Posts: 1,040

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 08, 2002

Location: Maine, United States

Posted: February 28, 2005 at 10:27 AM / IP Logged

What year and make is the vehicle?

Did you test the tachometer wire for the proper AC voltage or just attach it to the wire indicated on your vehicle's wire color chart?

Did you go through the tach learn procedure successfully?

Back to Top

ywdb

Member - Posts: 42

Joined: September 04, 2002

Location: Japan

Posted: February 28, 2005 at 6:44 PM / IP Logged

Hi again;

>Remote engine start run time is 8 min.

I am very sorry. This mean is "If you use alarm system remote start, the start feature is 8 minutes run time."

Now your problem is not this.

I think may be The Violet wire connect is not correct.

Pls check again this wire, or this wire re-connect to 12V output wire when the vehicle engin running.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Giordon 686 with remote start

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.