wiring in door actuators?

Home / the12volt's Install Bay / Relays / wiring in door actuators? (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

93gt--z

Member - Posts: 14

Joined: February 28, 2005

Location: Canada

Posted: February 28, 2005 at 8:40 PM / IP Logged

Hey, I'm new here...but I did search a bit first. Ok, I got a 93 beretta that I am installing a thor alarm into. I have everything hooked up except for the door lock actuators. My car didn't come with power locks,and I don't want a switch...I only want them to work by the remote. Anyway, I have the actuators, and I have two relays set up for them...I am just trying to get them working first, but I can't seem to figure it out...A friend gave me a pic(I'll attach it) to go by,but when I hook pin 87 and 86 up to +12v constant, I'm getting 12v on pin 86?Is this normal or what? I have it hooked to up exactly like the pic. Also, I am unclear on the alarm side of the lock wiring...Anyone familar with a thor alarm?

Thanks to anyone who can help me out a bit...

[IMG]https://img.photobucket.com/albums/v285/93gt--z/wiringdoors.bmp[/IMG]

alarm wiring...

[IMG]https://img.photobucket.com/albums/v285/93gt--z/100_0317.jpg[/IMG]

93gt--z

Member - Posts: 14

Joined: February 28, 2005

Location: Canada

Posted: February 28, 2005 at 8:42 PM / IP Logged

https://img.photobucket.com/albums/v285/93gt--z/100_0317.jpg

93 gt

93gt--z

Member - Posts: 14

Joined: February 28, 2005

Location: Canada

Posted: February 28, 2005 at 8:43 PM / IP Logged

wiring in door actuators? - Last Post -- posted image.

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: February 28, 2005 at 8:55 PM / IP Logged

ll you have to do is attach the (-) triggers from the Thor alarm to pin 85 on the relays. One relay gets the UNLOCK and one relay get the LOCK wire from the THOR system. Ground pins 87a on both systems and then grab both common wires from each actuator and attach it to pin 30 of the proper relay ( unlock & lock ). Test the system and if you arm the system and it unlocks on you reverse the wires on pin 85 and it will work properly for you.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

93gt--z

Member - Posts: 14

Joined: February 28, 2005

Location: Canada

Posted: February 28, 2005 at 9:05 PM / IP Logged

well I tried that, but I get nothing...can you tell me what wires from the alarm pic I need? I had the white ones hooked to it, but I got nothing...How can I test it?

"common wires from the actuator"? mine have a green and a blue wire...which one is it?or does it matter what wire goes to what relay?

krog67

Member - Posts: 4

Joined: December 21, 2004

Location: United States

Posted: March 08, 2005 at 7:21 PM / IP Logged

As long as you tie the same color from each actuator...it doesn't matter...you can reverse the terminals on the relays but they both go 30 on seperate relays...what color wires does the diagram say to use for door locks?

tanz2004

Member - Posts: 26

Joined: July 06, 2004

Location: United States

Posted: March 13, 2005 at 10:38 PM / IP Logged

93gt. If you still need help post a message. I see you asked a while back and would hate to write it all up if you already have it figured out.

Thanks

James

TanZ2004

Washington State

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

wiring in door actuators?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.