the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

overhead all-in-one unit


Post ReplyPost New Topic
< Prev Topic Next Topic >
another-kelly 
Silver - Posts: 618
Silver spacespace
Joined: July 11, 2004
Location: United States
Posted: March 11, 2005 at 11:50 AM / IP Logged  
**posting this for a fellow member of another forum. i will relay info until he gets his username set up**
 
Sup guys, just got my explorer. Its an 02 XLT V8. Anyways i bought a Flip Down Tv last night, an audiovox 8.5 widescreen with built in dvd. Unfortunately I had to return it within 20 mins overhead all-in-one unit -- posted image. due to when i got to the installation bay, the installer said he could not install it overhead all-in-one unit -- posted image. . He said that due to my a/c controls and the contour of the roof, there was no way to mount it properly. Does anyone have any info on possible relocating the a/c knobs or what should i do to get this tv in. He said that most fords have just a flat roof and arent a problem but since mine was curved, id either have to get a smaller unit, or one with a larger....um...the plastic mounting piece...not sure what he called it, but a larger one that he could cut to fit the contour. Any help greatly appreciated, have to get it in soon cuz were going on vacation soon and my 4 yr olds gotta have one.
auex 
Platinum - Posts: 5,041
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: December 23, 2002
Location: Arizona, United States
Posted: March 11, 2005 at 12:17 PM / IP Logged  
AC controls are easy to relocate, as are lights. As far as going with the all in one, I hate them. They are too big and sit to low. When you go back to the store ask to speak to the installer and see what he recommends, and have them go out to the car and look. Some manufacturer's make vehicle specific shrouds that contour to the roof of specific vehicles, I think Rosen and Magnadyne do.
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.
I've been sick lately, sorry I won't be on much.
another-kelly 
Silver - Posts: 618
Silver spacespace
Joined: July 11, 2004
Location: United States
Posted: March 11, 2005 at 1:50 PM / IP Logged  
"how would i then compensate for the curve in the roofline and make it flat for the tv, if i relocate the a/c knobs, the headliner angles up."
tonyIrv 
Member - Posts: 24
Member spacespace
Joined: May 10, 2004
Location: United States
Posted: March 11, 2005 at 2:39 PM / IP Logged  
I purchased an optional shroud that could be cut to match the contour of the roof. I think my DVD player is made by Pansonic.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Wednesday, May 1, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer