the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2004 Altima Keysense wire?

Home / the12volt's Install Bay / Car Security and Convenience / 2004 Altima Keysense wire? (Topic Closed Topic Closed)
Welcome Guest :)

Post ReplyPost New Topic
< Prev Topic Next Topic >
Mobilesecurity 
Member - Posts: 28
Member spacespace
Joined: December 13, 2004
Location: United States
Posted: March 12, 2005 at 6:33 PM / IP Logged  
Hopefully somebody can inform me if the 2004 altima's keysense wire needs to be installed to prevent false codes or deletion of the keys from memory. I'm using a universal transpoder typer bypass. Thanks once again for the help in advance
check twice connect once
johnnydi77 
Copper - Posts: 54
Copper spacespace
Joined: May 17, 2004
Location: United States
Posted: March 12, 2005 at 7:28 PM / IP Logged  
It's RED / blue and turns into black red found in the ignition harness.
John J. DiStefano Jr.
Mobilesecurity 
Member - Posts: 28
Member spacespace
Joined: December 13, 2004
Location: United States
Posted: March 12, 2005 at 7:52 PM / IP Logged  

PLEASE PLEASE PLEASE

If you respond to my post read my post fully before u respond because i already have that information.

I'm asking if i need to interface with the keysense wire to prevent the security system from locking down the car or possible deletion of the keys.

check twice connect once
johnnydi77 
Copper - Posts: 54
Copper spacespace
Joined: May 17, 2004
Location: United States
Posted: March 12, 2005 at 9:24 PM / IP Logged  
Ok I read it fully now. The keysense wire was already installed by the nissan manufacturer. If your asking if you need to interface it.  The answer is no.
John J. DiStefano Jr.
johnnydi77 
Copper - Posts: 54
Copper spacespace
Joined: May 17, 2004
Location: United States
Posted: March 12, 2005 at 9:31 PM / IP Logged  
One more thing....If that vehicle has auto lights you have to interupt the auto light wire.  If you don't the auto lights will stay on and won't shut off if you shut down the remote start via remote control.  Disregard if it doesn't have auto lights.
John J. DiStefano Jr.
Mobilesecurity 
Member - Posts: 28
Member spacespace
Joined: December 13, 2004
Location: United States
Posted: March 12, 2005 at 11:52 PM / IP Logged  
How would I interface with the autolights?
check twice connect once
johnnydi77 
Copper - Posts: 54
Copper spacespace
Joined: May 17, 2004
Location: United States
Posted: March 14, 2005 at 8:03 PM / IP Logged  
you have to open up the GREEN/ YELLOW auto light wire with a relay. I use a rearm output to do this.
John J. DiStefano Jr.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Saturday, May 4, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer