Remote start has mind of its own!

I have a few simple questions pertaining to the Mannix Remote Starter system I just installed into my vehicle if you could please help me..

 

First is the remote start. I purchased a Universal Bypass Module for my vehicle, 1998 Olds Intrigue, to bypass the Passlock II system. It needed an IGN 3 wire, which my the model I purchased does not have, so I followed the instructions to produce one with (2) Bosche 30amp relays. The remote start will only start the vehicle if I have the key in the ignition turned to the acc or on position. If I remove the key, the vehicle will not start, though the dash lights will come on indicating that it is preparing to. The remote will give a success chirp to indicate that the vehicle is starting, but it never cranks. Is this a Passlock issue and I need to check my bypass module, or is this an incorrect wiring to the IGN wires on the vehicle to the control module?

 

Second is that when I attempt to remote start the vehicle and it does not start, I hit the disarm key on my remote, enter the car, start it, and drive; the alarm will rearm itself automatically with the car in gear and moving and begin going off. What is causing this? Is there a particular disarm wire that I need to check the wiring of? What wire on the vehile do I need to connect the disarm wire to?

 

I would really appreciate your assitance in these matters.

 

Thanks you for your assitance;